2022.05.17New products
Announced the concept of "Absorb 6G CAM", an in Onboard Coaxial Camera Solution that supports Robot assembly, high performance, and miniaturization of in-vehicle cameras.
On May 17, 2022, IRISO Co., Ltd. (Headquarters: Yokohama City, Kanagawa Prefecture; Representative Director: Hitoshi Suzuki) announced the development of an in Onboard Coaxial Camera Solution "Absorb 6G CAM" that supports Robot assembly, high performance, and miniaturization of in-vehicle cameras. announced the concept of
The Absorb 6G CAM is a solution for a wide range of automotive camera interconnect needs. Based on technologies such as Floating structure Board to Board Connectors that IRISO has cultivated so far, the concept is "not a single connector, but a total proposal from the camera internal connector to the connection cable connector". It has three features of "Robot assembly support", "high performance camera support", and "miniaturization/single board support". We propose a total connection of 3 points between boards, and we also support customization according to your needs.
As the three features of Absorb 6G CAM, it supports Robot assembly and robot assembly. Contributes to absorption (maximum X Y direction: 0.9mm, Z direction: 1.0mm *Total combination of board connectors). In addition, high-speed transmission (3 GHz transmission compatible) ensures communication quality and low profile pixel counts improve camera performance. 5.5mm in width and 3.65mm in height (when using Nom).
About the individual products that make up the solution
The Absorb 6G CAM consists of a Floating structure Board to Board Connectors, a coaxial compression connector, a coaxial camera rear case connector and a FAKRA harness connector. We plan to start mass production in 2022. At this time, we are also accepting consultations for custom product development and prototyping.
| Product Specifications | Floating structure Board to Board Connectors (10126/10136 series) |
coaxial compression connector Coaxial camera rear case connector |
|
|---|---|---|---|
| pitch | mm | 0.4 | ― |
| Floating structure (Position misalignment absorption) |
mm | XY: ±0.4 Z: ±0.3 to ±0.5 |
XY: ±0.5 Z: ±0.5 |
| number of poles | pin | 20 to 60 | 1 |
| Mating height | mm | 3.0 to 5.0 | 3.65 (nom) |
| Operating temperature limit | ℃ | -40 to +125 | |
| Rated current | A | 0.4 | 1.0 |
| Rated voltage | V. | 50 | 50 |
Click here for details on the individual products that make up the solution.
About IRISO
IRISO is a leading company in the development of connectors for the automotive market such as infotainment, ADAS and powertrain. In recent years, we have expanded the scope of product development and applied the know-how we have cultivated in the automotive market to a wide range of electronic devices, including communication-related devices, consumer-related devices, and industrial-related devices. We also focus on product development.
イリソ電子工業株式会社 営業統括本部 デジタルマーケティング課
〒222-0033 神奈川県横浜市港北区新横浜2-13-8
TEL：045-478-3111 FAX：045-478-3539