- Top
- Technical Info
- Connector Glossary
- 2-Point Contact structure
What is a 2-Point Contact structure?
IRISO' "2-Point Contact structure" is a concept that has two contact structures on the same line. It removes foreign matter such as floating matter and scattered flux, and promises stable contact with reliable wiping.
In addition, even if one of the terminal contacts gets on the deposit, the other terminal contact of the 2-point contact connector is reliably connected to prevent contact failure.
By adopting a 2-point contact connector, contact reliability is improved, which improves yield and contributes to total cost reduction.
Advantages of using 2-point contact connectors
Various problems can be solved by using a two-point contact connector.
- The 2-Point Contact structure (two contacts on the same line) prevents poor contact.
- Foreign matter is removed during Mating even in environments where dirt is likely to occur.
- Improves yield and contributes to total cost reduction.
- It contributes to automation by absorbing misalignment during Mating due to robot assembly.
2-point contact connector introduction video
Related article
2-point contact connector product lineup
10110B/10109S series
0.635mm pitch, Floating structure type Right angle connection (ST/RA) Board to Board Connector connector for high-speed transmission of digital signals. Floating (Floating structure) structure with 0.5mm X Y direction to 0.5mm Floating effective Mating length in Z direction. 1.0Gbps (typical reference value based on in-house definition) for high-speed transmission. Impedance matching: Differential 100 Ω. Various Mating 2-point contact for reliable removal of foreign particles even in tough environment corresponding to high height.
9984 series
0.5mm pitch, Floating structure type Stacking connection (ST/ST) Board to Board Connector connector for high-speed transmission of digital signals. Floating (Floating structure) structure with 0.5mm X Y direction to 0.5mm Floating effective Mating length in Z direction. 1.0Gbps (typical reference value based on in-house definition) for high-speed transmission. Impedance matching: Differential 100Ω. Mating Height 8.0mm to 15.0mm. Stacking connection compatible with 2-point contact for reliable removal of foreign objects even in tough environments.
9984B/9985S series
0.5mm pitch, Floating structure type Stacking connection (ST/ST) Board to Board Connector connector for high-speed transmission of digital signals. Floating (Floating structure) structure with 0.5mm X Y direction to 0.5mm Floating effective Mating length in Z direction. 1.0Gbps (typical reference value based on in-house definition) for high-speed transmission. Impedance matching: Differential 100Ω. Mating Height 8.0mm to 15.0mm. Stacking connection compatible with 2-point contact for reliable removal of foreign objects even in tough environments.