Connectors - IRISO Electronics co.,ltd.

MENU

Auto I-Lock structure

What is Auto I-Lock structure?

イリソ電子工業のFPC/FFCコネクタ「Auto I-Lock TM」は、FPC/FFCカードを挿入すると自動にロックされる構造を持つコネクタです。スライダーやカバーの開閉動作を排し、FPC/FFCカードを挿入すると同時にロックがかかる構造で、斜め挿入や不完全嵌合が起こりにくく、作業効率が向上します。確実な嵌合が実現するため、FPC/FFCカード利用時でもロボット組立が可能になります。

Benefits of using Auto I-Lock structure

Various problems can be solved by using Auto I-Lock structure.

  • Prevents imperfect Mating, reduces inspection processes, and improves productivity.
  • The unique terminal structure enables high-speed transmission of digital signals.
  • A GND terminal is provided to support noise suppression when using a shielded FFC.
  • Robot assembly is possible by automatically locking. Contribute to automation.

Auto I-Lock structure introduction video

Related article

Auto I-Lock structure Product Lineup

11600S series

Connector for 0.5mm pitch NON-ZIF RA type FFC compatible with shielded FFC that enables high-speed transmission of digital signals. Equipped with a shield for EMC countermeasures. Optimized contact structure supports a transmission range of over 20 Gbps by selecting FFC (representative reference value defined by our company) Impedance matching: Differential 100 Ω. Auto I-Lock structure that is difficult to remove but easy to remove. Employs a drop-out prevention structure that locks at the same time as the FFC card is inserted. In addition, we will contribute to the Assembly automation our customers as IRISO 's Robot Friendly connector target product.
 

11501S series

Connector for 0.5mm pitch NON-ZIF RA type FFC compatible with shielded FFC that enables high-speed transmission of digital signals. Equipped with a shield for EMC countermeasures. Optimized contact structure supports a transmission range of over 20.0 Gbps by selecting FFC (representative reference value defined by our company) Impedance matching: Differential 100Ω. . Auto I-Lock structure that is difficult to remove but easy to remove. Employs a drop-out prevention structure that locks at the same time as the FFC card is inserted. In addition, we will contribute to the Assembly automation our customers as IRISO 's Robot Friendly connector target product.
 

11503S series

Connector for 0.5mm pitch NON-ZIF RA type FFC compatible with shielded FFC that enables high-speed transmission of digital signals. Equipped with a shield for EMC countermeasures. The optimized contact structure supports up to a transmission range of over 20 Gbps by selecting FFC (representative reference value defined by our company). Impedance Matching: Differential 100Ω. Auto I-Lock structure TM structure that is difficult to remove but easy to remove. Employs a drop-out prevention structure that locks at the same time as the FFC card is inserted. With confirmation window that allows visual inspection of full FFC insertion. In addition, we will contribute to the Assembly automation our customers as IRISO 's Robot Friendly connector target product.