- Top
- Technical Info
- Connector Glossary
- Z-Move structure
What is Z-Move structure?
IRISO' "Z-Move structure" has a Floating structure in which the X-axis and Y-axis Floating, and a structure in which the Z-axis Floating while the contacts are fixed. It is a connector that can absorb the minute board amplitude caused by Prevents deterioration of contact reliability due to micro-sliding wear.
It clears the standards for critical safety application that can be installed in vehicles, and greatly improves workability and reliability.
Benefits of using Z-Move structure
Various problems can be solved by using Z-Move structure.
- Floating in the Z-axis enables the use of connectors to equipment that is affected by vibration.
- Prevents poor contact due to vibration/load after the set is completed.
- We can make proposals from the initial design stage with our unique vibration simulation service.
- The design that emphasizes high heat resistance enables use in harsh high temperature environments.
- It contributes to automation by absorbing misalignment during Mating due to robot assembly.
Z-Move structure introduction video
Vibration comparison between conventional Floating connector and Z-Move structure
Related article
Z-Move structure product lineup
10120 series
2.0mm pitch, Z Floating (Z-Move structure) Floating structure type Stacking connection (ST/ST) Board to Board Connector connector for in-device connections intended for use in harsh vibration environments. Floating (Floating structure) construction with 0.65mm X Y direction to Floating. 0.02mm resonance amplitude and 0.8mm effective Mating length in the Z direction. Employs a two-point contact for reliable removal of foreign matter even in tough environments. 125°C compatible product for use in high-temperature environments. IRISO Uses proprietary Floating structure technology Z-Move structure (G-move) (trademark registered). This connector has excellent vibration resistance and shock resistance, preventing contact misalignment due to vibration resonance and shock by Floating moving in the Z direction while the contacts remain fixed. IRISO We will provide you with a fixing method adapted to your equipment Simulation using our unique analysis system.
10127 series
The "Electric car series" connector is a Board to Board Connector connector for internal connection (2.0mm pitch, Z-direction Floating). IRISO 's unique Floating structure technology "Z-Move structure" is used, assuming use in severe vibration environments. The Z-axis can Floating while the contacts are fixed, making this connector excellent in vibration and impact resistance.
10128 series
0.8mm pitch, Z Floating Floating structure type Stacking connection Board to Board Connector connector for connection in equipment intended for use in harsh vibration environments. Floating 0.5mm X Y direction to 0.5mm Floating in construction. 0.02mm resonance amplitude and 0.5mm effective Mating length in the Z direction. Employs two-point contact for reliable foreign object removal even in tough environments. 125°C rated product for use in high-temperature environments. IRISO Employs the industry's proprietary Floating structure technology, Z-Move structure (Zee Move). This connector has excellent vibration resistance and shock resistance, preventing contact misalignment due to resonance and shock by Floating moving in the Z direction while the contacts remain fixed. The use of a narrower pitch has enabled a space saving compared to the conventional 10120 series (approx. 50% reduction). We will strongly support your design by proposing a fixing method adapted to your equipment through vibration simulation.